Brocade 6510是一款48端口高性能企业级交换机,可通过市场领先的Gen 5 Fibre Channel(16 Gbps)技术满足高度虚拟化的私有云存储环境的各种需求。Brocade 6510交换机可在设计高效的1U产品包中提供最高的灵活性、操作简便性和可靠性。
1.概述
面向私有云存储的灵活、简便易用的企业级SAN交换机
为满足不断增长的业务需求,数据中心正迁移到高度虚拟化的私有云存储环境。这种方法使企业可以整合并简化IT资源,进而提高业务灵活性并降低资本支出和运营支出。但伴随虚拟化而来的还有一系列挑战。数据中心必须适应爆炸性数据增长和虚拟化工作负载带来的动态变化。要实现这些基于云的架构的全部优势,选择适当的网络是关键。
Brocade 6510交换机可交付市场领先的Gen 5 Fibre Channel(16 Gbps)技术和支持高度虚拟化环境的先进功能,进而满足超大规模私有云存储环境的需求。Brocade 6510设计用于实现最高的灵活性和可靠性,支持24、36或48端口配置,而且可在高效的1U包装中支持2、4、8、10或16 Gbps的速度。
简化的部署流程和点击式用户界面使Brocade 6510更加强大而且简便易用。Brocade 6510可帮助以很低的成本获得行业领先的存储区域网络(SAN)技术的优势,同时提供“边增长边付费”式可扩展性,来满足不断发展演进的存储环境的各种需求。
其它主要特性包括:
提供超高的性价比,在面向虚拟化数据中心和私有云架构的48端口交换机中结合出色的灵活性、简便性和企业级功能
利用按需端口扩展(PoD)功能,快速、简单而经济高效地从24个端口扩展到48个
利用Brocade EZSwitchSetup向导简化部署
借助动态Fabric架构配置(DFP)、关键性能监控和高级诊断特性加快部署和故障排除,缩短时间
借助冗余、可热插拔组件和平滑的软件升级最大限度地提高可用性
提供双重功能,既可用作功能全面的Fabric SAN交换机,又可用作支持NPIV的Brocade Access Gateway,进而简化服务器连接,提高SAN可扩展性
通过Brocade Network Advisor(博科网络顾问软件)简化并集中进行管理,降低运营成本和复杂性
2.特性
超高的性价比
采用Gen 5 Fibre Channel技术的Brocade 6510将市场领先的吞吐量和经济的交换机设计完美地结合起来,可提供超高的性价比来应对不断增长的SAN工作负载。48个端口可提供总共768 Gbps的全双工吞吐量;可将任意8个端口捆绑起来,形成128 Gbps的互联链路捆绑(Inter-Switch Link,ISL)。基于交换的动态路径选择(DPS)可以优化全Fabric架构的性能,并通过自动将数据路由到Fabric架构内最高效的空闲路径上来实现负载均衡。它可以进一步补充Brocade ISL链路捆绑,在特定配置中提供更有效的负载均衡。
此外,24端口的基本配置易于管理,只占用1U的机架空间而且能耗很低——每Gbps为0.14瓦,每端口为2.3瓦,因此总体拥有成本(TCO)很低。企业级功能与很低的TCO相结合,与成本相当的同类其它万兆以太网(10 GbE)解决方案相比可提供高40%的性能。
业界领先的技术
Brocade 6510在灵活、简单而且简便易用的解决方案中提供行业领先的SAN技术。基本配置包含24个端口,可根据需要最多扩展到48个端口。除了提供最高的可扩展性之外,Brocade 6510还可以通过Brocade EZSwitchSetup向导和可简化设置的全新“D_Port”特性来实现轻松部署。为实现最高的灵活性,该交换机还采用了1U高的外壳,深度不足18英寸,提供双向通风选项,可支持最新的热通道/冷通道(hot aisle/cold aisle)配置。
虚拟化私有云存储的有机组成部分
Brocade 6510为当前高度虚拟化的私有云存储环境提供了一个关键组件。它可以简化服务器虚拟化和虚拟桌面基础架构(VDI)管理,同时满足固态硬盘(SSD)的高吞吐量需求。Brocade 6510还可以通过Virtual Fabrics、QoS和基于Fabric架构的分区特性支持多租户(multi-tenancy)。
Brocade 6510可支持10 Gbps密波分复用(DWDM)链路、“In-flight”加密和ISL上的数据压缩,进而安全地将城域网扩展为虚拟私有云或混合云。企业可通过每台Brocade 6510交换机获得最多4个8 Gbps端口和2个16 Gbps端口,来支持“In-flight”加密和数据压缩。该交换机还支持On-board数据安全性和加速,从而最大限度地减小部署独立的加速设备来支持远距离扩展的需求。内部容错和企业级RAS特性可帮助最大限度地减少故障停机,来支持关键任务云环境。
Brocade Access Gateway模式
Brocade 6510可作为功能全面的Fabric架构交换机或作为Brocade Access Gateway(接入网关)进行部署,来简化Fabric架构拓扑和异构Fabric架构连接(其默认模式设置是交换机)。Brocade Access Gateway模式利用N_Port ID Virtualization(NPIV)交换机标准来直接向SAN Fabric架构的核心显示物理和虚拟服务器。这使它对SAN Fabric架构完全透明,因此可大大减轻网络边缘的管理工作。以Brocade Access Gateway模式*运行的Brocade 6510可以将服务器连接到支持NPIV的Brocade B系列、Brocade M系列或其它SAN Fabric架构。
企业可以通过Brocade Network Advisor(博科网络顾问软件)或CLI轻松实现Brocade Access Gateway模式。Brocade Access Gateway模式的主要优势包括:
更高的可扩展性,适合大型或快速增长的服务器和虚拟服务器环境
减少网络边缘的管理工作,因为Brocade Access Gateway没有域身份,在核心Fabric架构看来是完全透明的
支持异构SAN配置,而不减少服务器连接功能
在高性能交换机中提供企业级特性
Brocade 6510具有高级监控、诊断和RAS功能,可最大限度地提高可用性,优化性能并简化管理。这些企业级特性包括:
关键的诊断和监控功能,可帮助确保尽早完成故障检测和恢复
在每个端口上支持平滑、非破坏性监控,提供整个Fabric架构的端到端视图
前向纠错(FEC)可从ISL中的位错误中恢复,进而增强传输可靠性和性能
额外的缓冲器,可避免缓冲信用丢失导致的性能降低和拥塞
在ISL上根据主机/应用进行实时带宽消耗量计算,轻松识别热点和潜在的网络拥塞
Brocade 6510的Access Gateway模式仅在48端口配置中受支持。
3.规格
System Architecture | |
---|---|
Fibre Channel ports | Switch mode (default): 24-, 36-, and 48-port configurations (12-port increments through Ports on Demand [PoD] licenses); (E, F, M, D, EX) ports Access Gateway default port mapping: 40 F_Ports, 8 N_Ports |
Scalability | Full fabric architecture with a maximum of 239 switches |
Certified maximum | 6000 active nodes; 56 switches, 19 hops in Brocade Fabric OS® fabrics; 31 switches; larger fabrics certified as required |
Performance | Auto-sensing of 2, 4, 8, and 16 Gbps port speeds; 10 Gbps and optionally programmable to fixed port speed. |
ISL trunking | Frame-based trunking with up to eight 16 Gbps ports per ISL trunk; up to 128 Gbps per ISL trunk. Exchange-based load balancing across ISLs with DPS included in Brocade Fabric OS. There is no limit to how many trunk groups can be configured in the switch. |
Aggregate bandwidth | 768 Gbps end-to-end full duplex |
Maximum fabric latency | Latency for locally switched ports is 700 ns; encryption/compression is 5.5 µsec per node; Forward Error Correction (FEC) adds 400 ns between E_Ports (enabled by default). |
Maximum frame size | 2112 byte payload |
Frame buffers | 8192 dynamically allocated |
Classes of service | Class 2, Class 3, Class F (inter-switch frames) |
Port types | D_Port (Diagnostic Port), E_Port, EX_Port, F_Port, M_Port (Mirror Port); optional port type control Brocade Access Gateway mode: F_Port and NPIV-enabled N_Port |
Data traffic types | Fabric switches supporting unicast |
Media types | Hot-pluggable, industry-standard Small Form-Factor Pluggable (SFP+), LC connector; Short-Wavelength (SWL), Long-Wavelength (LWL); Extended Long-Wavelength (ELWL); distance depends on fiber optic cable and port speed. Supports SFP+ (2, 4, 8, 10, 16 Gbps) optical transceivers. |
USB | One USB port for system log file downloads or firmware upgrades |
Fabric services Note: Some fabric services do not apply or are unavailable in Brocade Access Gateway mode | Brocade Advanced Performance Monitoring (including Top Talkers for E_Ports, F_Ports, and Fabric mode); Brocade Adaptive Networking (Ingress Rate Limiting, Traffic Isolation, QoS); Bottleneck Detection; Brocade Advanced Zoning (default zoning, port/WWN zoning, broadcast zoning); Dynamic Fabric Provisioning (DFP); Dynamic Path Selection (DPS); Brocade Extended Fabrics; Enhanced BB credit recovery; Brocade Fabric Watch; FDMI; Frame Redirection; Frame-based Trunking; FSPF; Integrated Routing; IPoFC; Brocade ISL Trunking; Management Server; NPIV; NTP v3; Port Fencing; Registered State Change Notification (RSCN); Reliable Commit Service (RCS); Server Application Optimization (SAO); Simple Name Server (SNS); Virtual Fabrics (Logical Switch, Logical Fabric) |
Extension | Fibre Channel, in-flight compression (Brocade LZO) and encryption (AES-GCM-256); integrated 10 Gbps Fibre Channel for DWDM MAN connectivity |
Management | |
Supported management software | HTTP, SNMP v1/v3 (FE MIB, FC Management MIB), SSH; Auditing, Syslog; Brocade Advanced Web Tools, Advanced Performance Monitoring, Brocade Fabric Watch; Brocade Network Advisor SAN Enterprise or Brocade Network Advisor SAN Professional/Professional Plus; Command Line Interface (CLI); SMI-S compliant; Administrative Domains; trial licenses for add-on capabilities |
Security | AES-GCM-256 encryption on ISLs; DH-CHAP (between switches and end devices), FCAP switch authentication; FIPS 140-2 L2-compliant, HTTPS, IPsec, IP filtering, LDAP with IPv6, Port Binding, RADIUS, User-defined Role-Based Access Control (RBAC), Secure Copy (SCP), Secure RPC, SFTP, SSH v2, SSL, Switch Binding, Trusted Switch |
Management access | 10/100 Mbps Ethernet (RJ-45), in-band over Fibre Channel, serial port (RJ-45), and one USB port |
Diagnostics | D_Port offline diagnostics, including electrical/optical loopback, link traffic/latency/distance; POST and embedded online/offline diagnostics, including environmental monitoring, FCping and Pathinfo (FC traceroute), frame viewer, non-disruptive daemon restart, port mirroring, optics health monitoring, power monitoring, RAStrace logging, and Rolling Reboot Detection (RRD) |
Mechanical | |
Enclosure | Front-to-back airflow; power from back, 1U Back-to-front airflow; power from back, 1U |
Size | Width: 437.64 mm (17.23 in.) Height: 43.18 mm (1.7 in.) Depth: 443.23 mm (17.45 in.) |
System weight | 9.16 kg (20.20 lb) with two power supply FRUs, without transceivers |
Environment | |
Operating environment | Temperature: 0°C to 40°C/32°F to 104°F Humidity: 10% to 85% (non-condensing) |
Non-operating environment | Temperature: -25°C to 70°C/-13°F to 158°F Humidity: 10% to 90% (non-condensing) |
Operating altitude | Up to 3000 m (9842 ft) |
Storage altitude | Up to 12 km (39,370 ft) |
Shock | Operating: Up to 20 G, 6 ms half-sine Non-operating: Half sine, 33 G 11 ms, 3/eg axis |
Vibration | Operating: 0.5 g sine, 0.4 grms random, 5 to 500 Hz Non-operating: 2.0 g sine, 1.1 grms random, 5 to 500 Hz |
Heat dissipation | 48 ports at 338 BTU/hr |
Power | |
Power supply | Dual, hot-swappable redundant power supplies with integrated system cooling fans |
AC input | 85 V to 264 V ~5 A to 2.5 A |
Input line frequency | 47 Hz to 63 Hz |
Power consumption | 110 watts with all 48 ports populated with 16 Gbps SWL optics 72 watts for empty chassis with no optics |